Radon Testing & Mitigation in Washington, Iowa
Call (641) 334-4225 for Washington Radon Service
Washington is the county seat of Washington County, with a historic downtown square, established neighborhoods of older homes and newer houses on the edges of town and out on rural acreages. Whatever the age of your home, radon is worth checking. The American Lung Association reports that 58% of Iowa homes test above the EPA's action level of 4 pCi/L, and all of Iowa falls in the EPA's highest radon risk zone.
How we help Washington County homeowners
Testing: a certified tester places a continuous monitor in your lowest livable level for at least 48 hours, then gives you a report with your average radon level and hour-by-hour readings. Learn more about testing →
Mitigation: if your level is 4 pCi/L or higher, an Iowa-credentialed specialist installs a sealed pipe and fan system, usually in one day, then retests to confirm it worked. Learn more about mitigation →
Follow-up: the EPA suggests retesting every couple of years after a system is installed.
Serving all of Washington County
We help homeowners in Washington, Kalona, Wellman, Riverside, Ainsworth and the farms and acreages in between. One call to (641) 334-4225 connects you with a certified specialist who serves your area.
Farmhouses, acreages and additions
Rural Washington County homes often have foundations built in stages: an original cellar, a crawl space under a later kitchen or bedroom addition, and a slab under a garage or mudroom. Each section can let soil gas in. Certified specialists evaluate every part of the foundation and may use more than one suction point, a sealed crawl space membrane or a sump lid, so the system works for the whole house.
Building or finishing a basement?
If you're building in Washington County, ask your builder about radon-resistant construction: a gravel layer and plastic barrier under the slab, sealed openings and a vent pipe that can be activated with a fan later. It costs far less during construction. Finishing a basement? Test first. It's much easier to route a radon pipe before the drywall goes up, and you'll be spending more time at the level where radon is usually highest.
Buying or selling in Washington?
Radon testing is a routine part of many home inspections. If a test comes back high during a sale, buyers and sellers usually agree to install a system before closing, with a post-installation test as proof. Sellers can avoid surprises by testing before listing. Call (641) 334-4225 with your closing date and we'll help you get on a certified specialist's schedule quickly.
Washington radon questions
Do newer homes need testing?
Yes. A home's age doesn't predict its radon level. New homes can test high too.
What does mitigation cost?
Many homes fall in the roughly $800–$2,500 range, depending on the foundation and layout. You'll get a firm quote first.
How long does installation take?
Most systems are installed in one day, followed by a retest.
Will the fan raise my electric bill much?
Typically about as much as a light bulb or two running continuously.
Is radon in well water a concern?
Most radon exposure comes from soil gas, but homes on private wells can ask a specialist whether water testing makes sense.
Call (641) 334-4225 for Washington Radon Service
Nearby: Mount Pleasant · Fairfield · Muscatine · Burlington. See our radon FAQ.
Southeast Iowa Radon Pros connects you with independent, certified local providers.
